KAT - pneumatic - DIN
Ball valve
VALVE STYLE
Ball valve
USAGE
- On/off service
- Throttling service
VERSION
DIN
MEDIUM TEMPERATURE
-10
to 180 °C /
14
to
356 °F
SUPPLY
Pneumatic
VALVE SIZE
DN 15
to
DN 300
PRESSURE RATING
PN 10
to
PN 40
LINING
Keramik
Special features
- Ceramic-lined Ball Valve to meet high requirements concerning resistance to wear, corrosion and high temperatures
- Can be manufactured in all commonly available body materials
- To meet special requirements concerning temperature or fugitive emissions
- At low pressure drops and/or slow pressure build-up
Accessories
- - - -
Options
- TA-Luft
- Temperature range with FFKM up to +260 °C Kalrez® 6375 / up to +310 °C with Kalrez® 4079
KAT - pneumatic - DIN can be combinated with the following actuations:
Special features:
- Single-acting and double-acting piston actuator
- Suitable for strict requirements in chemical plants
- Opening angle 90°
- Signal pressures up to 10 bar
- Torques from 5 to 11674 Nm
- Temperatures from –40 to +80 °C
- End positions adjustable within wide range (+5°/–15°)
- Diagonal or parallel square drive position
- Position indicator adjustable in steps of 45°
- Encapsulated spring assemblies
- Power transmission without clearance thanks to involute gearing
- Direction of rotation reversible without requiring additional parts
- Surface treatment tested by Kesternich sulfur dioxide corrosion test and salt spray test
- Centering ring milled into the housing
- Standardized attachment of valve accessories according to VDI/VDE 3845 or NAMUR
- Simple attachment according to DIN EN ISO 5211
- Blow-out-proof travel stop screws
- Fast stroking speeds as standard
Special features:
- Single-acting and double-acting piston actuator
- Suitable for strict requirements in chemical plants
- Opening angle 90°
- Signal pressures up to 10 bar
- Torques from 18 to 1702 Nm
- Temperatures from –40 to +80 °C
- End positions adjustable within wide range (+5°/–15°)
- Additional pneumatic input at the top shaft end
- Diagonal or parallel square drive position
- Position indicator adjustable in steps of 45°
- Encapsulated spring assemblies
- Backlash-free force transmission thanks to involute gearing
- Direction of rotation reversible without requiring additional parts
- Surface treatment tested by Kesternich sulfur dioxide corrosion test and salt spray test
- Centering ring milled into the housing
- Standardized attachment of valve accessories according to VDI/VDE 3845 / NAMUR and VDI/VDE 3847
- Simple attachment according to DIN EN ISO 5211
- Blow-out-proof travel stop screws
- Fast stroking speeds as standard
- Integrated Automation acc. to VDI/VDE 3847
Information
Certificates
Only up-to-date documents are shown in the product selector. Check the documentation site for a list of all documents available.
Pin items on your list and contact us if you have any product-related questions.
Back to product selector