VALVES

PRODUCT SELECTOR

SMART IN FLOW CONTROL

BR 26d - pneumatic - DIN

BR 26d - pneumatic - DIN

Ball valve

VALVE STYLE
Ball valve

USAGE

  • Low-pressure service
  • On/off service

VERSION
DIN

MEDIUM TEMPERATURE
-10 to 200 °C / 14 to 392 °F

SUPPLY
Pneumatic

VALVE SIZE
DN 15 to DN 150

PRESSURE RATING
PN 16 to PN 40

LINING
without

Special features

  • Consisting of ball valve and actuator
  • Forged or bar stock ball valve
  • Metal sealing system
  • Gaskets live loaded on both sides
  • Trunnion-mounted ball
  • Corrosion-resistant materials to withstand corrosive process media
  • DIN ISO 5211 interface as standard
  • PTFE V-ring packing loaded by disk springs
  • TA Luft
  • Blow-out-proof shaft
  • Face-to-face dimensions according to DIN EN 558, Series 1 or ASME B16.10-2000
  • Leakage requirements according to DIN EN 12266

Accessories

  • Air filters

Options

  • Stem extension
  • Backup shaft seal
  • Heating jacket
  • Grooved flanges according to DIN EN 1092
  • Calibrated seals
  • Seals made of different materials

BR 26d - pneumatic - DIN can be combinated with the following actuations:

Special features:

  • Single-acting and double-acting piston actuator
  • Suitable for strict requirements in chemical plants
  • Opening angle 90°
  • Signal pressures up to 10 bar
  • Torques from 5 to 11674 Nm
  • Temperatures from –40 to +80 °C
  • End positions adjustable within wide range (+5°/–15°)
  • Diagonal or parallel square drive position
  • Position indicator adjustable in steps of 45°
  • Encapsulated spring assemblies
  • Power transmission without clearance thanks to involute gearing
  • Direction of rotation reversible without requiring additional parts
  • Surface treatment tested by Kesternich sulfur dioxide corrosion test and salt spray test
  • Centering ring milled into the housing
  • Standardized attachment of valve accessories according to VDI/VDE 3845 or NAMUR
  • Simple attachment according to DIN EN ISO 5211
  • Blow-out-proof travel stop screws
  • Fast stroking speeds as standard

Special features:

  • Single-acting and double-acting piston actuator
  • Suitable for strict requirements in chemical plants
  • Opening angle 90°
  • Signal pressures up to 10 bar
  • Torques from 18 to 1702 Nm
  • Temperatures from –40 to +80 °C
  • End positions adjustable within wide range (+5°/–15°)
  • Additional pneumatic input at the top shaft end
  • Diagonal or parallel square drive position
  • Position indicator adjustable in steps of 45°
  • Encapsulated spring assemblies
  • Backlash-free force transmission thanks to involute gearing
  • Direction of rotation reversible without requiring additional parts
  • Surface treatment tested by Kesternich sulfur dioxide corrosion test and salt spray test
  • Centering ring milled into the housing
  • Standardized attachment of valve accessories according to VDI/VDE 3845 / NAMUR and VDI/VDE 3847
  • Simple attachment according to DIN EN ISO 5211
  • Blow-out-proof travel stop screws
  • Fast stroking speeds as standard
  • Integrated Automation acc. to VDI/VDE 3847

Information

  • AB SAMLOOP

    SAMLOOP Antriebsausrichtung
    [DE]
  • T 26d

    BR 26d · Stainless Steel Ball Valve
    DIN and ANSI Version
    [EN][DE][FR]

Support

  • SH 26

    BR 26a / BR 26d / BR 26e / BR 26k / BR 26s Ball Valve
    BR 22a Bottom Drain Ball Valve
    [EN][DE]

Certificates

Only up-to-date documents are shown in the product selector. Check the documentation site for a list of all documents available.

Pin product

Pin items on your list and contact us if you have any product-related questions.

WATCHLIST

Wallet is empty
Back to product selector